Icon
Reliable Heating and Cooling Solutions – Quality Service, Fair Prices, Guaranteed Satisfaction!

Rinnai Error Code AdJ: Venturi reset sequence: step AdJ (RX/CX) (Tankless)

Updated · by Aurora Star Tech Inc.

Rinnai error code AdJ on a tankless water heater means: Venturi reset sequence: step AdJ (RX/CX). It is also called Rinnai diagnostic code AdJ.

Low severityTankless Water HeaterSENSEI RX/CX

Homeowner? What Rinnai code AdJ means for you

Usually minor Your tankless water heater is reporting: Venturi reset sequence: step AdJ (RX/CX). This code is usually informational or minor. The safe checks below often clear it; call us if it keeps showing up.

Safe things you can check yourself

  • Check that gas reaches the house: other gas appliances work, or the propane tank is not empty.
  • Make sure the heater is plugged in and its breaker is on. In winter, keep the power on: it protects the unit from freezing.
  • Outside, make sure the intake and exhaust pipes or vent cap are not blocked by snow, ice, leaves or a nest.
  • Check that the hot and cold water valves under the heater are fully open.
  • If you have a remote controller, turn it off and on once. If the code comes back, call a technician.

Call (647) 657-2977Book a service call

Licensed technicians serving Vaughan, Toronto and the GTA.

What does Rinnai error code AdJ mean?

A screen shown on SENSEI RX/CX units while stepping through the venturi/gas valve reset procedure by pressing button B on the PC board for 1 second at a time. It comes after t and before F.

Applies to: Rinnai SENSEI RX/CX tankless (RX, RXP, CX, CXP)

Safety: Gas, electrical and refrigerant work must be done by a licensed technician. Turn off power and gas before servicing, never bypass a safety control, and always follow the manufacturer's manual for your exact model.

Rinnai models that use code AdJ

CX160iCX199iCXP160iCXP199iRX130iRX160iRX180iRX199iRXP160iRXP199i

Other Rinnai Tankless codes

CodeMeaning
71Gas solenoid valve fault (SV0–SV4 on Non-SENSEI)
72Flame rod fault
73Burner thermocouple fault
79Water leakage detected
888Initial settings saved
AVenturi reset sequence: step A (RX/CX)
Bluetooth LED blinkingBluetooth LED blinking (push-button pairing mode)
Bluetooth LED solidBluetooth LED solid blue (app pairing mode)
dESDescaling (flush) mode
Diag historyMaintenance code history viewer (last 9 codes)
Diagnostic historyShow last 9 maintenance codes
EVenturi reset sequence: step E (code 17 or 52 only)

All Rinnai Tankless Water Heater error codes →

Rinnai code AdJ: homeowner questions

What does Rinnai code AdJ mean?

Venturi reset sequence: step AdJ (RX/CX). A screen shown on SENSEI RX/CX units while stepping through the venturi/gas valve reset procedure by pressing button B on the PC board for 1 second at a time. It comes after t and before F.

Is it safe to keep using my tankless water heater with code AdJ?

Usually yes. Code AdJ is normally minor, but if it keeps coming back have it checked.

Can I reset Rinnai code AdJ myself?

You can try one reset (power off for 30 seconds, then on). If Rinnai code AdJ comes back, the cause is still there and a licensed technician should check it.

Who can fix Rinnai code AdJ near me?

Aurora Star Tech Inc. repairs Rinnai tankless water heaters in Vaughan, Toronto and across the GTA. Call (647) 657-2977 or book a service call online.

Homeowner help: Tankless Water Heater No Hot Water: What to Check

Troubleshooting guides

Source: Rinnai Troubleshooting TWH Diagnostic Codes (100000652), Code 17 and Code 52 reset procedure p.28-29. Written in our own words as a summary; always check the original manual.

General guidance for qualified technicians. The manufacturer's installation and service manual and local codes always take priority. Aurora Star Tech is not affiliated with, endorsed by or sponsored by any equipment manufacturer; brand and model names are used only to identify equipment and belong to their owners.

Emergency HVAC Service

647-657-2977