Icon
Reliable Heating and Cooling Solutions – Quality Service, Fair Prices, Guaranteed Satisfaction!

Rinnai Error Code Diagnostic history: Show last 9 maintenance codes (Tankless)

Updated · by Aurora Star Tech Inc.

Rinnai error code Diagnostic history on a tankless water heater means: Show last 9 maintenance codes. It is also called Rinnai diagnostic code Diagnostic history.

Low severityTankless Water HeaterSENSEI RX/CX

Homeowner? What Rinnai code Diagnostic history means for you

Usually minor Your tankless water heater is reporting: Show last 9 maintenance codes. This code is usually informational or minor. The safe checks below often clear it; call us if it keeps showing up.

Safe things you can check yourself

  • Check that gas reaches the house: other gas appliances work, or the propane tank is not empty.
  • Make sure the heater is plugged in and its breaker is on. In winter, keep the power on: it protects the unit from freezing.
  • Outside, make sure the intake and exhaust pipes or vent cap are not blocked by snow, ice, leaves or a nest.
  • Check that the hot and cold water valves under the heater are fully open.
  • If you have a remote controller, turn it off and on once. If the code comes back, call a technician.

Call (647) 657-2977Book a service call

Licensed technicians serving Vaughan, Toronto and the GTA.

What does Rinnai error code Diagnostic history mean?

Lets a technician page through the last nine stored codes on the controller. LC appears as 00 in this history.

Applies to: SENSEI RX/CX (RX199i, RX180i, RX160i, RX130i, CX199i, CX160i, RXP199i, RXP160i, CXP199i, CXP160i)

Safety: Gas, electrical and refrigerant work must be done by a licensed technician. Turn off power and gas before servicing, never bypass a safety control, and always follow the manufacturer's manual for your exact model.

Rinnai models that use code Diagnostic history

CX160iCX199iCXP160iCXP199iRX130iRX160iRX180iRX199iRXP160iRXP199i

Other Rinnai Tankless codes

CodeMeaning
AVenturi reset sequence: step A (RX/CX)
AdJVenturi reset sequence: step AdJ (RX/CX)
Bluetooth LED blinkingBluetooth LED blinking (push-button pairing mode)
Bluetooth LED solidBluetooth LED solid blue (app pairing mode)
dESDescaling (flush) mode
Diag historyMaintenance code history viewer (last 9 codes)
EVenturi reset sequence: step E (code 17 or 52 only)
ECLReset complete
EndDescaling procedure ended
FVenturi reset sequence: step F
FEFlammable vapors detected
FFMaintenance performed (history marker)

All Rinnai Tankless Water Heater error codes →

Rinnai code Diagnostic history: homeowner questions

What does Rinnai code Diagnostic history mean?

Show last 9 maintenance codes. Lets a technician page through the last nine stored codes on the controller. LC appears as 00 in this history.

Is it safe to keep using my tankless water heater with code Diagnostic history?

Usually yes. Code Diagnostic history is normally minor, but if it keeps coming back have it checked.

Can I reset Rinnai code Diagnostic history myself?

You can try one reset (power off for 30 seconds, then on). If Rinnai code Diagnostic history comes back, the cause is still there and a licensed technician should check it.

Who can fix Rinnai code Diagnostic history near me?

Aurora Star Tech Inc. repairs Rinnai tankless water heaters in Vaughan, Toronto and across the GTA. Call (647) 657-2977 or book a service call online.

Homeowner help: Tankless Water Heater No Hot Water: What to Check

Troubleshooting guides

Source: Rinnai SENSEI RX/CX technical guide U362-0875, service procedures. Written in our own words as a summary; always check the original manual.

General guidance for qualified technicians. The manufacturer's installation and service manual and local codes always take priority. Aurora Star Tech is not affiliated with, endorsed by or sponsored by any equipment manufacturer; brand and model names are used only to identify equipment and belong to their owners.

Emergency HVAC Service

647-657-2977