Icon
Reliable Heating and Cooling Solutions – Quality Service, Fair Prices, Guaranteed Satisfaction!

Goodman Error Code df1: Defrost, low-stage electric heat (Air Handler)

Updated · by Aurora Star Tech Inc.

Goodman error code df1 on a air handler means: Defrost, low-stage electric heat. It is also called Goodman diagnostic code df1.

Low severityAir HandlerGoodman/Amana ComfortBridge AVPTC/MBVC

Homeowner? What Goodman code df1 means for you

Usually minor Your air handler is reporting: Defrost, low-stage electric heat. This code is usually informational or minor. The safe checks below often clear it; call us if it keeps showing up.

Safe things you can check yourself

  • Check the thermostat: right mode (Heat or Cool), set a few degrees past room temperature, and fresh batteries if it uses them.
  • Make sure the unit has power: its on/off switch (often looks like a light switch near the unit) is ON and the breaker in the electrical panel is not tripped.
  • Look at the air filter. If it is grey and clogged, replace it; a blocked filter causes many shutdowns.
  • Try one reset: turn the power off for 30 seconds, then back on. If the code comes back, stop resetting and call a technician.

Call (647) 657-2977Book a service call

Licensed technicians serving Vaughan, Toronto and the GTA.

What does Goodman error code df1 mean?

Shown during defrost while the low stage of electric heat is on. Normal.

Applies to: AVPTC / MBVC ComfortBridge air handlers

Safety: Gas, electrical and refrigerant work must be done by a licensed technician. Turn off power and gas before servicing, never bypass a safety control, and always follow the manufacturer's manual for your exact model.

Goodman models that use code df1

Show all 21 models

AVPTC25B14AVPTC29B14AVPTC31C14AVPTC31C14ADAVPTC33C14AVPTC35B14AVPTC37B14AVPTC37C14AVPTC37D14AVPTC39C14AVPTC49C14AVPTC49D14AVPTC59C14AVPTC59D14AVPTC61D14AVPTC183014AVPTC313714AVPTC426014MBVC1201MBVC1601MBVC2001

Other Goodman Air Handler codes

CodeMeaning
5rShared data revision
ACCompressor cooling, single stage (non-comm)
AC1Compressor cooling, low stage (comm)
AC2Compressor cooling, high stage (comm)
AxxAirflow readout (A08 = 800 CFM)
CrControl firmware revision
df2Defrost, high-stage electric heat
dftDefrost, single-stage electric heat (non-comm)
dHUDehumidification
E0FCondensate switch open - high water in drain pan
E05Air handler fuse open
Eb0Blower motor not running with a demand present

All Goodman Air Handler error codes →

Goodman code df1: homeowner questions

What does Goodman code df1 mean?

Defrost, low-stage electric heat. Shown during defrost while the low stage of electric heat is on. Normal.

Is it safe to keep using my air handler with code df1?

Usually yes. Code df1 is normally minor, but if it keeps coming back have it checked.

Can I reset Goodman code df1 myself?

You can try one reset (power off for 30 seconds, then on). If Goodman code df1 comes back, the cause is still there and a licensed technician should check it.

Who can fix Goodman code df1 near me?

Aurora Star Tech Inc. repairs Goodman air handlers in Vaughan, Toronto and across the GTA. Call (647) 657-2977 or book a service call online.

Troubleshooting guides

Source: Goodman ComfortNet ASXC-DSXC-GSXC / ASZC-DSZC-GSZC / AVPTC-MBVC service, Air Handler Display (B*) system status table p.63. Written in our own words as a summary; always check the original manual.

General guidance for qualified technicians. The manufacturer's installation and service manual and local codes always take priority. Aurora Star Tech is not affiliated with, endorsed by or sponsored by any equipment manufacturer; brand and model names are used only to identify equipment and belong to their owners.

Air Handler Emergency

647-657-2977