Icon
Reliable Heating and Cooling Solutions – Quality Service, Fair Prices, Guaranteed Satisfaction!

Navien Error Code DHW temperature: DHW temperature display (Boiler)

Updated · by Aurora Star Tech Inc.

Navien error code DHW temperature on a boiler means: DHW temperature display. It is also called Navien diagnostic code DHW temperature.

Low severityBoilerNavien NHB-H

Homeowner? What Navien code DHW temperature means for you

Usually minor Your boiler is reporting: DHW temperature display. This code is usually informational or minor. The safe checks below often clear it; call us if it keeps showing up.

Safe things you can check yourself

  • Check the thermostat: right mode (Heat or Cool), set a few degrees past room temperature, and fresh batteries if it uses them.
  • Make sure the unit has power: its on/off switch (often looks like a light switch near the unit) is ON and the breaker in the electrical panel is not tripped.
  • Look at the pressure gauge on the boiler. If it reads much lower than usual or near zero, or water is leaking, call a technician.
  • Outside, make sure the intake and exhaust pipes or vent cap are not blocked by snow, ice, leaves or a nest.
  • Check that the boiler gas valve is open (handle in line with the pipe).
  • Try one reset: turn the power off for 30 seconds, then back on. If the code comes back, stop resetting and call a technician.

Call (647) 657-2977Book a service call

Licensed technicians serving Vaughan, Toronto and the GTA.

What does Navien error code DHW temperature mean?

Digits showing the DHW set and current temperature.

Applies to: NHB-055H, NHB-080H, NHB-110H, NHB-150H

Safety: Gas, electrical and refrigerant work must be done by a licensed technician. Turn off power and gas before servicing, never bypass a safety control, and always follow the manufacturer's manual for your exact model.

Navien models that use code DHW temperature

NHB-055HNHB-080HNHB-110HNHB-150H

Other Navien Boiler codes

CodeMeaning
DHW demand iconDHW demand present
DHW Operation TimeService Status Info item 2 - DHW Operation Time
DHW priority iconDHW priority enabled
DHW Priority Output StatusInput/Output Status item 16 - DHW Priority Output Status
DHW Set TempStatus Information item 4 - DHW Set Temp
DHW Tank set TempStatus Information item 12 - DHW Tank set Temp
DHW Thermostat StatusInput/Output Status item 4 - DHW Thermostat Status
Dual Venturi StatusInput/Output Status item 13 - Dual Venturi Status
E001Heat exchanger overheat
E003Ignition failure
E004False flame detected
E012Flame loss

All Navien Boiler error codes →

Navien code DHW temperature: homeowner questions

What does Navien code DHW temperature mean?

DHW temperature display. Digits showing the DHW set and current temperature.

Is it safe to keep using my boiler with code DHW temperature?

Usually yes. Code DHW temperature is normally minor, but if it keeps coming back have it checked.

Can I reset Navien code DHW temperature myself?

You can try one reset (power off for 30 seconds, then on). If Navien code DHW temperature comes back, the cause is still there and a licensed technician should check it.

Who can fix Navien code DHW temperature near me?

Aurora Star Tech Inc. repairs Navien boilers in Vaughan, Toronto and across the GTA. Call (647) 657-2977 or book a service call online.

Homeowner help: Boiler Not Heating: What to Check

Troubleshooting guides

Source: Navien NHB-H User's Information Manual (V1.0 Apr 2024), 2.3.1 Icons and Digital Display, p.7. Written in our own words as a summary; always check the original manual.

General guidance for qualified technicians. The manufacturer's installation and service manual and local codes always take priority. Aurora Star Tech is not affiliated with, endorsed by or sponsored by any equipment manufacturer; brand and model names are used only to identify equipment and belong to their owners.

Emergency Boiler Repair

647-657-2977