Skytech Error Code 1 Beep Every 4 Seconds: Communication safety – remote and receiver not talking (Gas Fireplace)
Skytech error code 1 Beep Every 4 Seconds on a gas fireplace means: Communication safety - remote and receiver not talking. It is also called Skytech diagnostic code 1 Beep Every 4 Seconds.
Homeowner? What Skytech code 1 Beep Every 4 Seconds means for you
Usually minor Your gas fireplace is reporting: Communication safety - remote and receiver not talking. This code is usually informational or minor. The safe checks below often clear it; call us if it keeps showing up.
Safe things you can check yourself
- Replace the batteries in the remote and in the receiver or battery pack (weak batteries are the most common cause).
- Make sure the wall switch is ON and the fireplace has power if it uses a plug-in adapter.
- Check that the gas valve to the fireplace is open (handle in line with the pipe).
- If you smell gas, do not try to light it: leave the house and call your gas utility or 911 from outside.
Call (647) 657-2977Book a service call
Licensed technicians serving Vaughan, Toronto and the GTA.
What does Skytech error code 1 Beep Every 4 Seconds mean?
Only on transmitters with an LCD screen: the transmitter and receiver are not communicating properly.
Applies to: Skytech AF-4000 MOD-1, AF-4000 MOD A and SMART MOD remote modules (used on many fireplace brands)
Common causes of Skytech code 1 Beep Every 4 Seconds
- Weak batteries in the transmitter or receiver
- Transmitter more than 20 ft from the receiver
- Transmitter inside a metal enclosure or lying on metal
Skytech models that use code 1 Beep Every 4 Seconds
AF-4000 MOD-1AF-4000 MOD ASMART MOD
Other Skytech Gas Fireplace codes
All Skytech Gas Fireplace error codes →
Skytech code 1 Beep Every 4 Seconds: homeowner questions
What does Skytech code 1 Beep Every 4 Seconds mean?
Communication safety - remote and receiver not talking. Only on transmitters with an LCD screen: the transmitter and receiver are not communicating properly.
Is it safe to keep using my gas fireplace with code 1 Beep Every 4 Seconds?
Usually yes. Code 1 Beep Every 4 Seconds is normally minor, but if it keeps coming back have it checked.
Can I reset Skytech code 1 Beep Every 4 Seconds myself?
You can try one reset (power off for 30 seconds, then on). If Skytech code 1 Beep Every 4 Seconds comes back, the cause is still there and a licensed technician should check it.
Who can fix Skytech code 1 Beep Every 4 Seconds near me?
Aurora Star Tech Inc. repairs Skytech gas fireplaces in Vaughan, Toronto and across the GTA. Call (647) 657-2977 or book a service call online.
Homeowner help: Gas Fireplace Won't Light or Stay Lit
Troubleshooting guides
- Flameworks millivolt valve: pilot outage or burner will not come on All brands · Gas Fireplace
- Maxitrol GV60 remote valve: fireplace will not light or respond All brands · Gas Fireplace
- Proflame (SIT DFC): fan, AUX outlet, split flow or OFF command not working All brands · Gas Fireplace
- Proflame (SIT DFC): pilot lights but main burner will not light or drops out All brands · Gas Fireplace
- Proflame (SIT DFC): pilot will not light or DFC locks out All brands · Gas Fireplace
- SIT 820 Nova millivolt valve: main burner will not come on or will not cycle All brands · Gas Fireplace
- SIT 820 Nova millivolt valve: pilot will not light All brands · Gas Fireplace
- SIT 820 Nova millivolt valve: pilot will not stay lit All brands · Gas Fireplace
Source: Skytech Audible Alerts & Error Codes for AF-4000 MOD-1 / MOD A / SMART MOD, p.2-3. Written in our own words as a summary; always check the original manual.
General guidance for qualified technicians. The manufacturer's installation and service manual and local codes always take priority. Aurora Star Tech is not affiliated with, endorsed by or sponsored by any equipment manufacturer; brand and model names are used only to identify equipment and belong to their owners.