Skytech Error Code 1 Beep Every Second: Ignition safety – pilot did not light in 60 seconds (Gas Fireplace)
Skytech error code 1 Beep Every Second on a gas fireplace means: Ignition safety - pilot did not light in 60 seconds. It is also called Skytech diagnostic code 1 Beep Every Second.
Homeowner? What Skytech code 1 Beep Every Second means for you
Call a technician Your gas fireplace is reporting: Ignition safety - pilot did not light in 60 seconds. The gas fireplace has locked out or cannot run properly. One reset is fine; if the code comes back, it needs a licensed technician to find the cause.
Safe things you can check yourself
- Replace the batteries in the remote and in the receiver or battery pack (weak batteries are the most common cause).
- Make sure the wall switch is ON and the fireplace has power if it uses a plug-in adapter.
- Check that the gas valve to the fireplace is open (handle in line with the pipe).
- If you smell gas, do not try to light it: leave the house and call your gas utility or 911 from outside.
Call (647) 657-2977Book a service call
Licensed technicians serving Vaughan, Toronto and the GTA.
What does Skytech error code 1 Beep Every Second mean?
The module beeps once a second when it could not light the pilot within 60 seconds.
Applies to: Skytech AF-4000 MOD-1, AF-4000 MOD A and SMART MOD remote modules (used on many fireplace brands)
Common causes of Skytech code 1 Beep Every Second
- Gas supply off
- Module orange/white leads not plugged into the PILOT connection on the valve
- Igniter lead not on the module I terminal
A technician checks these and 3 other possible causes on site before replacing any part.
Skytech models that use code 1 Beep Every Second
AF-4000 MOD-1AF-4000 MOD ASMART MOD
Other Skytech Gas Fireplace codes
All Skytech Gas Fireplace error codes →
Skytech code 1 Beep Every Second: homeowner questions
What does Skytech code 1 Beep Every Second mean?
Ignition safety - pilot did not light in 60 seconds. The module beeps once a second when it could not light the pilot within 60 seconds.
Is it safe to keep using my gas fireplace with code 1 Beep Every Second?
It depends on the cause. The gas fireplace has locked out or cannot run properly. One reset is fine; if the code comes back, it needs a licensed technician to find the cause.
Can I reset Skytech code 1 Beep Every Second myself?
You can try one reset (power off for 30 seconds, then on). If Skytech code 1 Beep Every Second comes back, the cause is still there and a licensed technician should check it.
Who can fix Skytech code 1 Beep Every Second near me?
Aurora Star Tech Inc. repairs Skytech gas fireplaces in Vaughan, Toronto and across the GTA. Call (647) 657-2977 or book a service call online.
Homeowner help: Gas Fireplace Won't Light or Stay Lit
Troubleshooting guides
- Flameworks millivolt valve: pilot outage or burner will not come on All brands · Gas Fireplace
- Maxitrol GV60 remote valve: fireplace will not light or respond All brands · Gas Fireplace
- Proflame (SIT DFC): fan, AUX outlet, split flow or OFF command not working All brands · Gas Fireplace
- Proflame (SIT DFC): pilot lights but main burner will not light or drops out All brands · Gas Fireplace
- Proflame (SIT DFC): pilot will not light or DFC locks out All brands · Gas Fireplace
- SIT 820 Nova millivolt valve: main burner will not come on or will not cycle All brands · Gas Fireplace
- SIT 820 Nova millivolt valve: pilot will not light All brands · Gas Fireplace
- SIT 820 Nova millivolt valve: pilot will not stay lit All brands · Gas Fireplace
Source: Skytech Audible Alerts & Error Codes for AF-4000 MOD-1 / MOD A / SMART MOD, p.2-3. Written in our own words as a summary; always check the original manual.
General guidance for qualified technicians. The manufacturer's installation and service manual and local codes always take priority. Aurora Star Tech is not affiliated with, endorsed by or sponsored by any equipment manufacturer; brand and model names are used only to identify equipment and belong to their owners.