Rinnai Error Code Troubleshoot menu: Troubleshoot menu (read operating parameters) (Air Handler)
Rinnai error code Troubleshoot menu on a air handler means: Troubleshoot menu (read operating parameters). It is also called Rinnai diagnostic code Troubleshoot menu.
Homeowner? What Rinnai code Troubleshoot menu means for you
Usually minor Your air handler is reporting: Troubleshoot menu (read operating parameters). This code is usually informational or minor. The safe checks below often clear it; call us if it keeps showing up.
Safe things you can check yourself
- Check the thermostat: right mode (Heat or Cool), set a few degrees past room temperature, and fresh batteries if it uses them.
- Make sure the unit has power: its on/off switch (often looks like a light switch near the unit) is ON and the breaker in the electrical panel is not tripped.
- Look at the air filter. If it is grey and clogged, replace it; a blocked filter causes many shutdowns.
- Try one reset: turn the power off for 30 seconds, then back on. If the code comes back, stop resetting and call a technician.
Call (647) 657-2977Book a service call
Licensed technicians serving Vaughan, Toronto and the GTA.
What does Rinnai error code Troubleshoot menu mean?
Password-protected menu that shows the air handler's operating parameters for diagnosis. Reached from the Configuration menu.
Applies to: Rinnai Canadian hydronic air handler (CAH)
Other Rinnai Air Handler codes
| Code | Meaning |
|---|---|
| Configuration menu | Configuration menu |
| Installer menu | Installer menu (password protected) |
| Status menu | Status menu (operating parameters) |
All Rinnai Air Handler error codes →
Rinnai code Troubleshoot menu: homeowner questions
What does Rinnai code Troubleshoot menu mean?
Troubleshoot menu (read operating parameters). Password-protected menu that shows the air handler's operating parameters for diagnosis. Reached from the Configuration menu.
Is it safe to keep using my air handler with code Troubleshoot menu?
Usually yes. Code Troubleshoot menu is normally minor, but if it keeps coming back have it checked.
Can I reset Rinnai code Troubleshoot menu myself?
You can try one reset (power off for 30 seconds, then on). If Rinnai code Troubleshoot menu comes back, the cause is still there and a licensed technician should check it.
Who can fix Rinnai code Troubleshoot menu near me?
Aurora Star Tech Inc. repairs Rinnai air handlers in Vaughan, Toronto and across the GTA. Call (647) 657-2977 or book a service call online.
Troubleshooting guides
- Circulator pump does not run Rinnai · Air Handler
- Enter the Installer menu (password) Rinnai · Air Handler
- Enter the Troubleshoot menu (password) Rinnai · Air Handler
- Heat comes out in fan-only mode Rinnai · Air Handler
- Insufficient or no heat Rinnai · Air Handler
- Pump noisy at start-up Rinnai · Air Handler
- Set Furnace Model after replacing the control board Rinnai · Air Handler
Source: Rinnai Canadian Air Handler Installation and Operation Manual (600000023), Software Settings p.41-42. Written in our own words as a summary; always check the original manual.
General guidance for qualified technicians. The manufacturer's installation and service manual and local codes always take priority. Aurora Star Tech is not affiliated with, endorsed by or sponsored by any equipment manufacturer; brand and model names are used only to identify equipment and belong to their owners.