Kinghome Error Code E2: Indoor coil anti-freeze protection (Heat Pump)
Kinghome error code E2 on a heat pump means: Indoor coil anti-freeze protection. It is also called Kinghome diagnostic code E2.
Homeowner? What Kinghome code E2 means for you
Check, then call Your heat pump is reporting: Indoor coil anti-freeze protection. This is often caused by something simple. Try the safe checks below; if the code returns, book a service call before it turns into a no-heat or no-hot-water emergency.
Safe things you can check yourself
- Check the thermostat: right mode (Heat or Cool), set a few degrees past room temperature, and fresh batteries if it uses them.
- Check both breakers and the outdoor disconnect box beside the outdoor unit; all should be ON.
- Look at the air filter. If it is grey and clogged, replace it; a blocked filter causes many shutdowns.
- In winter, keep snow and ice off and away from the outdoor unit. A short defrost cycle with steam is normal.
- Try one reset: turn the power off for 30 seconds, then back on. If the code comes back, stop resetting and call a technician.
Call (647) 657-2977Book a service call
Licensed technicians serving Vaughan, Toronto and the GTA.
What does Kinghome error code E2 mean?
The indoor coil got cold enough to trigger freeze protection in cooling or drying mode, so the compressor and outdoor fan stop while the indoor fan keeps running.
Applies to: Kinghome KM09HT1DI, KM12HT1DI, KM18HT1DI, KM24HT1DI wall mini-splits; Kinghome KM09HF1DI to KM24HF1DI wall mini-splits (Gree GFH..DA/DB)
Common causes of Kinghome code E2
- Poor return air at the indoor unit
- Abnormal indoor fan speed
- Dirty evaporator
Kinghome models that use code E2
KM09HF1DIKM09HT1DIKM12HF1DIKM12HT1DIKM18HF1DIKM18HT1DIKM21HF1DIKM24HF1DIKM24HT1DI
Other Kinghome Heat Pump codes
All Kinghome Heat Pump error codes →
Kinghome code E2: homeowner questions
What does Kinghome code E2 mean?
Indoor coil anti-freeze protection. The indoor coil got cold enough to trigger freeze protection in cooling or drying mode, so the compressor and outdoor fan stop while the indoor fan keeps running.
Is it safe to keep using my heat pump with code E2?
It depends on the cause. This is often caused by something simple. Try the safe checks below; if the code returns, book a service call before it turns into a no-heat or no-hot-water emergency.
Can I reset Kinghome code E2 myself?
You can try one reset (power off for 30 seconds, then on). If Kinghome code E2 comes back, the cause is still there and a licensed technician should check it.
Who can fix Kinghome code E2 near me?
Aurora Star Tech Inc. repairs Kinghome heat pumps in Vaughan, Toronto and across the GTA. Call (647) 657-2977 or book a service call online.
Homeowner help: AC Running But Not Cooling: What to Check · Heat Pump Not Heating or Blowing Cold Air
Source: Kinghome KM09-12-18-24HT1DI service manual, sec. 9.1 error code list; Kinghome KM09-24HF1DI service manual, sec. 11.1 error code list. Written in our own words as a summary; always check the original manual.
General guidance for qualified technicians. The manufacturer's installation and service manual and local codes always take priority. Aurora Star Tech is not affiliated with, endorsed by or sponsored by any equipment manufacturer; brand and model names are used only to identify equipment and belong to their owners.