Trane Error Code E13: Blower HP / OEM ID mismatch (Air Handler)
Trane error code E13 on a air handler means: Blower HP / OEM ID mismatch. It is also called Trane diagnostic code E13.
Homeowner? What Trane code E13 means for you
Check, then call Your air handler is reporting: Blower HP / OEM ID mismatch. This is often caused by something simple. Try the safe checks below; if the code returns, book a service call before it turns into a no-heat or no-hot-water emergency.
Safe things you can check yourself
- Check the thermostat: right mode (Heat or Cool), set a few degrees past room temperature, and fresh batteries if it uses them.
- Make sure the unit has power: its on/off switch (often looks like a light switch near the unit) is ON and the breaker in the electrical panel is not tripped.
- Look at the air filter. If it is grey and clogged, replace it; a blocked filter causes many shutdowns.
- Try one reset: turn the power off for 30 seconds, then back on. If the code comes back, stop resetting and call a technician.
Call (647) 657-2977Book a service call
Licensed technicians serving Vaughan, Toronto and the GTA.
What does Trane error code E13 mean?
The blower motor ID does not match what the control expects.
Applies to: Trane P0V0 modular blowers (P0V0A/B/C/D)
Common causes of Trane code E13
- Wrong replacement motor or personality module
Trane models that use code E13
P0V0A000M30SCAP0V0B000M40SCAP0V0C000M50SCAP0V0D000M50SCA
Other Trane Air Handler codes
All Trane Air Handler error codes →
Trane code E13: homeowner questions
What does Trane code E13 mean?
Blower HP / OEM ID mismatch. The blower motor ID does not match what the control expects.
Is it safe to keep using my air handler with code E13?
It depends on the cause. This is often caused by something simple. Try the safe checks below; if the code returns, book a service call before it turns into a no-heat or no-hot-water emergency.
Can I reset Trane code E13 myself?
You can try one reset (power off for 30 seconds, then on). If Trane code E13 comes back, the cause is still there and a licensed technician should check it.
Who can fix Trane code E13 near me?
Aurora Star Tech Inc. repairs Trane air handlers in Vaughan, Toronto and across the GTA. Call (647) 657-2977 or book a service call online.
Troubleshooting guides
- Reading and clearing fault history - Trane P0V0 modular blower Trane · Air Handler
Source: Trane 18-GE20D1-1E-EN (P0V0 installer's guide) - section IMBC Display Codes, Error Codes. Written in our own words as a summary; always check the original manual.
General guidance for qualified technicians. The manufacturer's installation and service manual and local codes always take priority. Aurora Star Tech is not affiliated with, endorsed by or sponsored by any equipment manufacturer; brand and model names are used only to identify equipment and belong to their owners.