Icon
Reliable Heating and Cooling Solutions – Quality Service, Fair Prices, Guaranteed Satisfaction!

Trane Error Code E17: Blower motor not responding (Air Handler)

Updated · by Aurora Star Tech Inc.

Trane error code E17 on a air handler means: Blower motor not responding. It is also called Trane diagnostic code E17.

High severityAir HandlerTrane P0V0

Homeowner? What Trane code E17 means for you

Call a technician Your air handler is reporting: Blower motor not responding. The air handler has locked out or cannot run properly. One reset is fine; if the code comes back, it needs a licensed technician to find the cause.

Safe things you can check yourself

  • Check the thermostat: right mode (Heat or Cool), set a few degrees past room temperature, and fresh batteries if it uses them.
  • Make sure the unit has power: its on/off switch (often looks like a light switch near the unit) is ON and the breaker in the electrical panel is not tripped.
  • Look at the air filter. If it is grey and clogged, replace it; a blocked filter causes many shutdowns.
  • Try one reset: turn the power off for 30 seconds, then back on. If the code comes back, stop resetting and call a technician.

Call (647) 657-2977Book a service call

Licensed technicians serving Vaughan, Toronto and the GTA.

What does Trane error code E17 mean?

The motor gives no reply to the control.

Applies to: Trane P0V0 modular blowers (P0V0A/B/C/D)

Common causes of Trane code E17

  • Loose motor communication harness
  • No power at motor
  • Failed motor
Safety: Gas, electrical and refrigerant work must be done by a licensed technician. Turn off power and gas before servicing, never bypass a safety control, and always follow the manufacturer's manual for your exact model.

Trane models that use code E17

P0V0A000M30SCAP0V0B000M40SCAP0V0C000M50SCAP0V0D000M50SCA

Other Trane Air Handler codes

CodeMeaning
E6.1120 V polarity reversed
E6.2Ground not detected
E12Control fuse open
E13Blower HP / OEM ID mismatch
E14No personality module and local copy bad
E15Unit data file corrupt in module and control
E18Blower communication failure on the control side

All Trane Air Handler error codes →

Trane code E17: homeowner questions

What does Trane code E17 mean?

Blower motor not responding. The motor gives no reply to the control.

Is it safe to keep using my air handler with code E17?

It depends on the cause. The air handler has locked out or cannot run properly. One reset is fine; if the code comes back, it needs a licensed technician to find the cause.

Can I reset Trane code E17 myself?

You can try one reset (power off for 30 seconds, then on). If Trane code E17 comes back, the cause is still there and a licensed technician should check it.

Who can fix Trane code E17 near me?

Aurora Star Tech Inc. repairs Trane air handlers in Vaughan, Toronto and across the GTA. Call (647) 657-2977 or book a service call online.

Troubleshooting guides

Source: Trane 18-GE20D1-1E-EN (P0V0 installer's guide) - section IMBC Display Codes, Error Codes. Written in our own words as a summary; always check the original manual.

General guidance for qualified technicians. The manufacturer's installation and service manual and local codes always take priority. Aurora Star Tech is not affiliated with, endorsed by or sponsored by any equipment manufacturer; brand and model names are used only to identify equipment and belong to their owners.

Air Handler Emergency

647-657-2977