Trane Error Code E15: Unit data file corrupt in module and control (Air Handler)
Trane error code E15 on a air handler means: Unit data file corrupt in module and control. It is also called Trane diagnostic code E15.
Homeowner? What Trane code E15 means for you
Call a technician Your air handler is reporting: Unit data file corrupt in module and control. The air handler has locked out or cannot run properly. One reset is fine; if the code comes back, it needs a licensed technician to find the cause.
Safe things you can check yourself
- Check the thermostat: right mode (Heat or Cool), set a few degrees past room temperature, and fresh batteries if it uses them.
- Make sure the unit has power: its on/off switch (often looks like a light switch near the unit) is ON and the breaker in the electrical panel is not tripped.
- Look at the air filter. If it is grey and clogged, replace it; a blocked filter causes many shutdowns.
- Try one reset: turn the power off for 30 seconds, then back on. If the code comes back, stop resetting and call a technician.
Call (647) 657-2977Book a service call
Licensed technicians serving Vaughan, Toronto and the GTA.
What does Trane error code E15 mean?
Both the personality module data file and the control's local copy are corrupt.
Applies to: Trane P0V0 modular blowers (P0V0A/B/C/D)
Common causes of Trane code E15
- Corrupted personality module and control data
Trane models that use code E15
P0V0A000M30SCAP0V0B000M40SCAP0V0C000M50SCAP0V0D000M50SCA
Other Trane Air Handler codes
All Trane Air Handler error codes →
Trane code E15: homeowner questions
What does Trane code E15 mean?
Unit data file corrupt in module and control. Both the personality module data file and the control's local copy are corrupt.
Is it safe to keep using my air handler with code E15?
It depends on the cause. The air handler has locked out or cannot run properly. One reset is fine; if the code comes back, it needs a licensed technician to find the cause.
Can I reset Trane code E15 myself?
You can try one reset (power off for 30 seconds, then on). If Trane code E15 comes back, the cause is still there and a licensed technician should check it.
Who can fix Trane code E15 near me?
Aurora Star Tech Inc. repairs Trane air handlers in Vaughan, Toronto and across the GTA. Call (647) 657-2977 or book a service call online.
Troubleshooting guides
- Reading and clearing fault history - Trane P0V0 modular blower Trane · Air Handler
Source: Trane 18-GE20D1-1E-EN (P0V0 installer's guide) - section IMBC Display Codes, Error Codes. Written in our own words as a summary; always check the original manual.
General guidance for qualified technicians. The manufacturer's installation and service manual and local codes always take priority. Aurora Star Tech is not affiliated with, endorsed by or sponsored by any equipment manufacturer; brand and model names are used only to identify equipment and belong to their owners.