Allied Furnace: Remove bottom panel for horizontal or bottom return installs
Remove bottom panel for horizontal or bottom return installs on a Allied furnace: These Allied A95UH, A93UH, 95G1UH and 92G1UH furnaces come with a bottom panel already fitted. I have seen guys set the furnace on a bottom return plenum with the panel still in place and then wonder why it starves for air. If you are using bottom return, in either horizontal or upflow, the panel has to come out before the furnace goes in.
Applies to: A95UH, A93UH, 95G1UH and 92G1UH
Common causes of remove bottom panel for horizontal or bottom return installs
- Bottom panel left in place on a bottom return install
- Panel forgotten because it ships installed
- Furnace already set and ducted before anyone noticed the panel
How to fix remove bottom panel for horizontal or bottom return installs: step by step
- Remove the bottom panel before setting the unit in horizontal or upflow installs with bottom return air.
- Check the return opening is open and clear once the unit is in position.
- After startup, confirm the temperature rise is normal as a check that the return air is not restricted.
If the unit shows an error code, look it up: Allied Furnace codes
Models
92G1UH92G1UH0450892G1UH0451292G1UH0700892G1UH0701292G1UH0901292G1UH0901692G1UH1101692G1UH1102092G1UH1352095G1UHA93UHA95UH
Source: Allied 92G1UH installation manual, p. 8. Written in our own words as a summary; always check the original manual.
General guidance for qualified technicians. The manufacturer's installation and service manual and local codes always take priority. Aurora Star Tech is not affiliated with, endorsed by or sponsored by any equipment manufacturer; brand and model names are used only to identify equipment and belong to their owners.