Allied Furnace: Exhaust tee and direction notes
Exhaust tee and direction notes on a Allied furnace: Figure 32 shows the exhaust tee termination. Do not use an accelerator with the tee. The exhaust must never point toward the combustion air inlet.
Applies to: Sidewall exhaust terminations with optional tee
How to fix exhaust tee and direction notes: step by step
- Connect the exhaust termination tee to the 2 in. or 3 in. PVC flue pipe as shown.
- Do not install an accelerator when an exhaust termination tee is used.
- Rotate the exhaust 45 degree elbow to the side away from the combustion air inlet if needed to keep exhaust away from neighbors.
- Never direct exhaust toward the combustion air inlet.
If the unit shows an error code, look it up: Allied Furnace codes
Models
92G1UH92G1UH0450892G1UH0451292G1UH0700892G1UH0701292G1UH0901292G1UH0901692G1UH1101692G1UH1102092G1UH1352095G1UHA93UHA95UH
Source: Allied 92G1UH installation instructions manual, p. 32. Written in our own words as a summary; always check the original manual.
General guidance for qualified technicians. The manufacturer's installation and service manual and local codes always take priority. Aurora Star Tech is not affiliated with, endorsed by or sponsored by any equipment manufacturer; brand and model names are used only to identify equipment and belong to their owners.