Icon
Reliable Heating and Cooling Solutions – Quality Service, Fair Prices, Guaranteed Satisfaction!

Carrier Error Code EC57: Refrigerant pipe sensor fault (Mini-Split)

Updated · by Aurora Star Tech Inc.

Carrier error code EC57 on a mini-split means: Refrigerant pipe sensor fault. It is also called Carrier diagnostic code EC57.

Medium severityMini-SplitCarrier DLCM(R/H)B multi-zone outdoor

Homeowner? What Carrier code EC57 means for you

Check, then call Your ductless mini-split is reporting: Refrigerant pipe sensor fault. This is often caused by something simple. Try the safe checks below; if the code returns, book a service call before it turns into a no-heat or no-hot-water emergency.

Safe things you can check yourself

  • Check the remote: fresh batteries and the right mode (Cool, Heat or Auto).
  • Check the breaker and the outdoor disconnect; both should be ON.
  • Open the front cover of the indoor unit and rinse the washable filters if they are dusty; let them dry before putting them back.
  • Keep the outdoor unit clear of snow, ice and leaves.
  • Try one reset: turn the power off for 30 seconds, then back on. If the code comes back, stop resetting and call a technician.

Call (647) 657-2977Book a service call

Licensed technicians serving Vaughan, Toronto and the GTA.

What does Carrier error code EC57 mean?

The refrigerant pipe temperature sensor reads out of range.

Applies to: DLCMRBH / DLCMHBH multi-zone outdoor units 18-48K (Midea, Carrier, Viessmann Vitocal 200-S)

Common causes of Carrier code EC57

  • Sensor plug loose
  • Bad sensor
  • Bad outdoor PCB
Safety: Gas, electrical and refrigerant work must be done by a licensed technician. Turn off power and gas before servicing, never bypass a safety control, and always follow the manufacturer's manual for your exact model.

Carrier models that use code EC57

DLCMHBH24CAKDLCMHBH30DAKDLCMHBH36DAKDLCMHBH48EAKDLCMRBH18BAKDLCMRBH36DAKDLCMRBH48EAK

Other Carrier Mini-Split codes

CodeMeaning
EC51Outdoor EEPROM error
EC52Condenser coil sensor (T3) fault
EC53Outdoor ambient sensor (T4) fault
EC54Discharge temperature sensor (TP/T5) fault
EC55IPM temperature sensor fault
EC56Indoor coil outlet sensor (T2B) fault
EC71Outdoor fan motor over-current
EC72Outdoor fan motor phase loss
EH0AIndoor EEPROM error
EH0bIndoor PCB to display board communication error
EH00Indoor EEPROM error
EH02Zero-crossing signal error

All Carrier Mini-Split error codes →

Carrier code EC57: homeowner questions

What does Carrier code EC57 mean?

Refrigerant pipe sensor fault. The refrigerant pipe temperature sensor reads out of range.

Is it safe to keep using my ductless mini-split with code EC57?

It depends on the cause. This is often caused by something simple. Try the safe checks below; if the code returns, book a service call before it turns into a no-heat or no-hot-water emergency.

Can I reset Carrier code EC57 myself?

You can try one reset (power off for 30 seconds, then on). If Carrier code EC57 comes back, the cause is still there and a licensed technician should check it.

Who can fix Carrier code EC57 near me?

Aurora Star Tech Inc. repairs Carrier ductless mini-splits in Vaughan, Toronto and across the GTA. Call (647) 657-2977 or book a service call online.

Homeowner help: AC Running But Not Cooling: What to Check · Heat Pump Not Heating or Blowing Cold Air

Troubleshooting guides

Source: DLCMRBH/DLCMHBH Multi-Zone Outdoor Service Manual (sold as Midea, Carrier and Viessmann Vitocal 200-S; Viessmann doc 6225551-03, 12/2024), Table 23 Outdoor Unit Error Display p.26. Written in our own words as a summary; always check the original manual.

General guidance for qualified technicians. The manufacturer's installation and service manual and local codes always take priority. Aurora Star Tech is not affiliated with, endorsed by or sponsored by any equipment manufacturer; brand and model names are used only to identify equipment and belong to their owners.

Emergency HVAC Service

647-657-2977