Majestic Gas Fireplace: Test the optional thermostat blower
Test the optional thermostat blower on a Majestic gas fireplace: Quick check after installing the BLOTBLDV blower.
Applies to: 400DVBLN/PV7, 500DVBLN/PV7 (millivolt)
How to fix test the optional thermostat blower: step by step
- Set the variable speed control to LOW
- Run the fireplace on high; blower should start within 10 minutes
- If it does not, shut down and let it cool, unplug the blower
- With a jeweler's screwdriver turn the white dial on the speed control 1/8 turn counterclockwise and retest
Safety: Gas, electrical and refrigerant work must be done by a licensed technician. Turn off power and gas before servicing, never bypass a safety control, and always follow the manufacturer's manual for your exact model.
If the unit shows an error code, look it up: Majestic Gas Fireplace codes
Source: Majestic DVBL7 Series Installation and Operating Instructions, p. 27. Written in our own words as a summary; always check the original manual.
General guidance for qualified technicians. The manufacturer's installation and service manual and local codes always take priority. Aurora Star Tech is not affiliated with, endorsed by or sponsored by any equipment manufacturer; brand and model names are used only to identify equipment and belong to their owners.