Trane Error Code H6: Hard lock: high drive IPM temperature (Heat Pump)
Trane error code H6 on a heat pump means: Hard lock: high drive IPM temperature. It is also called Trane diagnostic code H6.
Homeowner? What Trane code H6 means for you
Stop and call Your heat pump is reporting: Hard lock: high drive IPM temperature. This code is a safety shutdown. Turn the heat pump off and call a licensed technician. Do not keep resetting it. If you smell gas, leave the house and call your gas utility or 911 from outside.
Safe things you can check yourself
- Check the thermostat: right mode (Heat or Cool), set a few degrees past room temperature, and fresh batteries if it uses them.
- Check both breakers and the outdoor disconnect box beside the outdoor unit; all should be ON.
Call (647) 657-2977Book a service call
Licensed technicians serving Vaughan, Toronto and the GTA.
What does Trane error code H6 mean?
IPM over-temperature reached hard-lock level. Manual lists only the meaning (A1000BA board); steps are general checks drawn from other sections of the guide.
Applies to: Trane 5TWR7 multi-speed heat pump (5TWR7024A-060A)
Common causes of Trane code H6
- Blocked airflow over drive/coil
- Dirty coil
- Very high ambient
A technician checks these and 1 other possible causes on site before replacing any part.
Trane models that use code H6
5TWR7024A5TWR7036A5TWR7048A5TWR7060A
Other Trane Heat Pump codes
All Trane Heat Pump error codes →
Trane code H6: homeowner questions
What does Trane code H6 mean?
Hard lock: high drive IPM temperature. IPM over-temperature reached hard-lock level. Manual lists only the meaning (A1000BA board); steps are general checks drawn from other sections of the guide.
Is it safe to keep using my heat pump with code H6?
No. Code H6 is a safety shutdown, so keep the heat pump off until a licensed technician has checked it.
Can I reset Trane code H6 myself?
Do not keep resetting it. Repeated resets can hide a safety problem; a licensed technician needs to find the cause.
Who can fix Trane code H6 near me?
Aurora Star Tech Inc. repairs Trane heat pumps in Vaughan, Toronto and across the GTA. Call (647) 657-2977 or book a service call online.
Homeowner help: AC Running But Not Cooling: What to Check · Heat Pump Not Heating or Blowing Cold Air
Troubleshooting guides
- Force a defrost cycle with the button Trane · Heat Pump
- Forcing a defrost - Trane 5TWR7 Trane · Heat Pump
Source: Trane ODR-SVN002E-EN (5TTR7/5TWR7 installer's guide) - section Integrated Variable Speed Control Board LED Indicators, Table 18 (A1000BA models). Written in our own words as a summary; always check the original manual.
General guidance for qualified technicians. The manufacturer's installation and service manual and local codes always take priority. Aurora Star Tech is not affiliated with, endorsed by or sponsored by any equipment manufacturer; brand and model names are used only to identify equipment and belong to their owners.