Trane Error Code —: Faults cleared confirmation (Air Handler)
Trane error code --- on a air handler means: Faults cleared confirmation. It is also called Trane diagnostic code ---.
Homeowner? What Trane code --- means for you
Usually minor Your air handler is reporting: Faults cleared confirmation. This code is usually informational or minor. The safe checks below often clear it; call us if it keeps showing up.
Safe things you can check yourself
- Check the thermostat: right mode (Heat or Cool), set a few degrees past room temperature, and fresh batteries if it uses them.
- Make sure the unit has power: its on/off switch (often looks like a light switch near the unit) is ON and the breaker in the electrical panel is not tripped.
- Look at the air filter. If it is grey and clogged, replace it; a blocked filter causes many shutdowns.
- Try one reset: turn the power off for 30 seconds, then back on. If the code comes back, stop resetting and call a technician.
Call (647) 657-2977Book a service call
Licensed technicians serving Vaughan, Toronto and the GTA.
What does Trane error code --- mean?
A set of three dashes flashes three times to confirm that the last 6 faults were cleared.
Applies to: P0V0 modular blower integrated control (IMBC)
Trane models that use code ---
P0V0A000M30SCAP0V0B000M40SCAP0V0C000M50SCAP0V0D000M50SCA
Other Trane Air Handler codes
All Trane Air Handler error codes →
Trane code ---: homeowner questions
What does Trane code --- mean?
Faults cleared confirmation. A set of three dashes flashes three times to confirm that the last 6 faults were cleared.
Is it safe to keep using my air handler with code ---?
Usually yes. Code --- is normally minor, but if it keeps coming back have it checked.
Can I reset Trane code --- myself?
You can try one reset (power off for 30 seconds, then on). If Trane code --- comes back, the cause is still there and a licensed technician should check it.
Who can fix Trane code --- near me?
Aurora Star Tech Inc. repairs Trane air handlers in Vaughan, Toronto and across the GTA. Call (647) 657-2977 or book a service call online.
Troubleshooting guides
- Read or clear the last 6 faults (L6F menu) Trane · Air Handler
- Reading and clearing fault history - Trane P0V0 modular blower Trane · Air Handler
- Reset the control to factory defaults Trane · Air Handler
- Run test mode (furnace) Trane · Air Handler
Source: Trane P0V0 modular blower installer's guide 18-GE20D1-1E-EN, Fault Code Recovery, p.31. Written in our own words as a summary; always check the original manual.
General guidance for qualified technicians. The manufacturer's installation and service manual and local codes always take priority. Aurora Star Tech is not affiliated with, endorsed by or sponsored by any equipment manufacturer; brand and model names are used only to identify equipment and belong to their owners.