Goodman Error Code d2: System mismatch – indoor unit cannot supply required airflow (AC)
Goodman error code d2 on a air conditioner means: System mismatch - indoor unit cannot supply required airflow. It is also called Goodman diagnostic code d2.
Homeowner? What Goodman code d2 means for you
Check, then call Your air conditioner is reporting: System mismatch - indoor unit cannot supply required airflow. This is often caused by something simple. Try the safe checks below; if the code returns, book a service call before it turns into a no-heat or no-hot-water emergency.
Safe things you can check yourself
- Check the thermostat: right mode (Heat or Cool), set a few degrees past room temperature, and fresh batteries if it uses them.
- Check both breakers and the outdoor disconnect box beside the outdoor unit; all should be ON.
- Look at the air filter. If it is grey and clogged, replace it; a blocked filter causes many shutdowns.
- Keep about 2 feet around the outdoor unit clear of leaves, grass and debris.
- If you see ice on the pipes or the indoor coil, turn the system off and run only the fan for a few hours, then call a technician.
- Try one reset: turn the power off for 30 seconds, then back on. If the code comes back, stop resetting and call a technician.
Call (647) 657-2977Book a service call
Licensed technicians serving Vaughan, Toronto and the GTA.
What does Goodman error code d2 mean?
In a communicating system the outdoor unit needs more airflow than the indoor unit can deliver, or the shared data is incompatible / missing values. The unit may not run, or runs at reduced capacity or on low stage only.
Applies to: Communicating 2-stage condensers and heat pumps with the PCBHR104 or PCBHR105 outdoor control (7-segment display): ASXC16/18, GSXC16/18, DSXC16/18, ASZC16/18, GSZC16/18, DSZC16/18
Common causes of Goodman code d2
- Indoor unit too small for the outdoor unit
- Shared data not compatible with the system or missing parameters
Goodman models that use code d2
Show all 23 models
ASXC160241ASXC160361ASXC160481ASXC160601ASXC180241ASXC180361ASXC180481ASXC180601DSXC160241DSXC160361DSXC160481DSXC160601DSXC180361DSXC180481DSXC180601GSXC160241GSXC160361GSXC160481GSXC160601GSXC180241GSXC180361GSXC180481GSXC180601
Other Goodman AC codes
All Goodman Air Conditioner error codes →
Goodman code d2: homeowner questions
What does Goodman code d2 mean?
System mismatch - indoor unit cannot supply required airflow. In a communicating system the outdoor unit needs more airflow than the indoor unit can deliver, or the shared data is incompatible / missing values. The unit may not run, or runs at reduced capacity or on low stage only.
Is it safe to keep using my air conditioner with code d2?
It depends on the cause. This is often caused by something simple. Try the safe checks below; if the code returns, book a service call before it turns into a no-heat or no-hot-water emergency.
Can I reset Goodman code d2 myself?
You can try one reset (power off for 30 seconds, then on). If Goodman code d2 comes back, the cause is still there and a licensed technician should check it.
Who can fix Goodman code d2 near me?
Aurora Star Tech Inc. repairs Goodman air conditioners in Vaughan, Toronto and across the GTA. Call (647) 657-2977 or book a service call online.
Homeowner help: AC Running But Not Cooling: What to Check
Troubleshooting guides
- Not cooling All brands · Air Conditioner
- No cooling - R-32 GLXS/ALXS condenser Goodman · Air Conditioner
Source: Goodman ComfortNet ASXC/GSXC/DSXC, ASZC/GSZC/DSZC, AVPTC/MBVC service manual, Unitary Diagnostic Codes PCBHR104 p.71-77 and PCBHR105 p.78-84. Written in our own words as a summary; always check the original manual.
General guidance for qualified technicians. The manufacturer's installation and service manual and local codes always take priority. Aurora Star Tech is not affiliated with, endorsed by or sponsored by any equipment manufacturer; brand and model names are used only to identify equipment and belong to their owners.