Icon
Reliable Heating and Cooling Solutions – Quality Service, Fair Prices, Guaranteed Satisfaction!

Gree Error Code nU: Cancel indoor long-distance shielding (factory function) (Heat Pump)

Updated · by Aurora Star Tech Inc.

Gree error code nU on a heat pump means: Cancel indoor long-distance shielding (factory function). It is also called Gree diagnostic code nU.

Low severityHeat PumpGree GMV6 Mini VRF

Homeowner? What Gree code nU means for you

Usually minor Your heat pump is reporting: Cancel indoor long-distance shielding (factory function). This code is usually informational or minor. The safe checks below often clear it; call us if it keeps showing up.

Safe things you can check yourself

  • Check the thermostat: right mode (Heat or Cool), set a few degrees past room temperature, and fresh batteries if it uses them.
  • Check both breakers and the outdoor disconnect box beside the outdoor unit; all should be ON.
  • Look at the air filter. If it is grey and clogged, replace it; a blocked filter causes many shutdowns.
  • In winter, keep snow and ice off and away from the outdoor unit. A short defrost cycle with steam is normal.
  • Try one reset: turn the power off for 30 seconds, then back on. If the code comes back, stop resetting and call a technician.

Call (647) 657-2977Book a service call

Licensed technicians serving Vaughan, Toronto and the GTA.

What does Gree error code nU mean?

nU is listed as a function code that removes the long-distance shielding command from the indoor unit. The manual states it needs factory direction.

Applies to: Gree GMV6 Ultra Heat Mini VRF 36-60k (GMV-V..WL/C-T(U))

Safety: Gas, electrical and refrigerant work must be done by a licensed technician. Turn off power and gas before servicing, never bypass a safety control, and always follow the manufacturer's manual for your exact model.

Gree models that use code nU

GMV-V36WL/C-T(U)GMV-V48WL/C-T(U)GMV-V60WL/C-T(U)

Other Gree Heat Pump codes

CodeMeaning
nCSystem mode: cooling only
nENegative number prefix
nFSystem mode: fan only
nHSystem mode: heating only
nJHigh temperature prevention when heating (factory function)
nnConnection pipe length modification (factory function)
oCCommissioning step passed (OK)
oEUndefined outdoor unit error
oFDebugging finished / standby
onValve test running / unit started
Operation lampOperation lamp lit (power on / standby)
Outdoor comm light blinkingOutdoor communication light blinking (normal)

All Gree Heat Pump error codes →

Gree code nU: homeowner questions

What does Gree code nU mean?

Cancel indoor long-distance shielding (factory function). nU is listed as a function code that removes the long-distance shielding command from the indoor unit. The manual states it needs factory direction.

Is it safe to keep using my heat pump with code nU?

Usually yes. Code nU is normally minor, but if it keeps coming back have it checked.

Can I reset Gree code nU myself?

You can try one reset (power off for 30 seconds, then on). If Gree code nU comes back, the cause is still there and a licensed technician should check it.

Who can fix Gree code nU near me?

Aurora Star Tech Inc. repairs Gree heat pumps in Vaughan, Toronto and across the GTA. Call (647) 657-2977 or book a service call online.

Homeowner help: AC Running But Not Cooling: What to Check · Heat Pump Not Heating or Blowing Cold Air

Troubleshooting guides

Source: Gree GMV6 Ultra Heat Mini VRF 36-60k (GMV-V36-48-60WL-C-T(U)) service.pdf - section Chapter 3 Faults, 4.1 Error Indication. Written in our own words as a summary; always check the original manual.

General guidance for qualified technicians. The manufacturer's installation and service manual and local codes always take priority. Aurora Star Tech is not affiliated with, endorsed by or sponsored by any equipment manufacturer; brand and model names are used only to identify equipment and belong to their owners.

Emergency HVAC Service

647-657-2977