Trane Furnace Clearance to combustibles
Trane Furnace Clearance to combustibles: reference table for the furnace (Trane S9V2 series): a quick-reference table with notes.
Trane Furnace Clearance to combustibles table
| Position | Sides | Back | Top | Front / bottom / flue |
|---|---|---|---|---|
| Upright closet | 0 in. | 1 in. | 1 in. | 0 in. |
| Horizontal closet / alcove | 0 in. | 1 in. | 1 in. | 0 in. |
| Horizontal, flue out left | 0 in. | 1 in. | 1 in. | 0 in. |
How to use the Trane Furnace Clearance to combustibles table
Find your exact model in the first column and read across the row. Values in the Trane Furnace Clearance to combustibles table are a summary for quick reference; the rating plate on the unit and the manufacturer's manual for your model always decide. If your model is not listed, or a value looks different from what you see on the unit, check the manual before changing anything.
Notes
- 24 in. front clearance recommended for service.
- Furnace must sit level (slight tilt left/forward allowed) so condensate drains.
Applies to: All S9V2 models
Trane models this applies to
S9V2B040U3VSACS9V2B060U3VSACS9V2B080D4VSACS9V2B080U4VSACS9V2C100D4VSACS9V2C100U4VSACS9V2D120U5VSAC
Source: Trane 18-CE19D1-1B-EN (S9V2) - Locations and Clearances. Written in our own words as a summary; always check the original manual.
General guidance for qualified technicians. The manufacturer's installation and service manual and local codes always take priority. Aurora Star Tech is not affiliated with, endorsed by or sponsored by any equipment manufacturer; brand and model names are used only to identify equipment and belong to their owners.