Icon
Reliable Heating and Cooling Solutions – Quality Service, Fair Prices, Guaranteed Satisfaction!

Bosch Error Code E81: EEV coil fault (Heat Pump)

Updated · by Aurora Star Tech Inc.

Bosch error code E81 on a heat pump means: EEV coil fault. It is also called Bosch diagnostic code E81.

Medium severityHeat PumpBosch IDS Light · Bosch IDS Premium Connected

Homeowner? What Bosch code E81 means for you

Check, then call Your heat pump is reporting: EEV coil fault. This is often caused by something simple. Try the safe checks below; if the code returns, book a service call before it turns into a no-heat or no-hot-water emergency.

Safe things you can check yourself

  • Check the thermostat: right mode (Heat or Cool), set a few degrees past room temperature, and fresh batteries if it uses them.
  • Check both breakers and the outdoor disconnect box beside the outdoor unit; all should be ON.
  • Look at the air filter. If it is grey and clogged, replace it; a blocked filter causes many shutdowns.
  • In winter, keep snow and ice off and away from the outdoor unit. A short defrost cycle with steam is normal.
  • Try one reset: turn the power off for 30 seconds, then back on. If the code comes back, stop resetting and call a technician.

Call (647) 657-2977Book a service call

Licensed technicians serving Vaughan, Toronto and the GTA.

What does Bosch error code E81 mean?

The expansion valve coil is faulty or not connected.

Applies to: Bosch IDS Light BOVA15-24/36/60 and IDS Premium Connected BOVA36-20/60-20 R-454B heat pump outdoor units

Common causes of Bosch code E81

  • Loose EEV coil wiring
  • Failed coil
Safety: Gas, electrical and refrigerant work must be done by a licensed technician. Turn off power and gas before servicing, never bypass a safety control, and always follow the manufacturer's manual for your exact model.

Bosch models that use code E81

BOVA15-24BOVA15-36BOVA15-60BOVA36-20BOVA60-20

Other Bosch Heat Pump codes

CodeMeaning
E42T3L temperature sensor fault
E43T4 temperature sensor fault
E44T5 temperature sensor fault
E45Th temperature sensor fault
E51Input voltage out of range
E52DC bus voltage out of range
EAControl and drive program mismatch
F1High pressure switch protection
F2System lockout (5 low-pressure trips in 100 minutes)
F4Pressure transducer fault
F41High pressure sensor fault
F42Low pressure sensor fault

All Bosch Heat Pump error codes →

Bosch code E81: homeowner questions

What does Bosch code E81 mean?

EEV coil fault. The expansion valve coil is faulty or not connected.

Is it safe to keep using my heat pump with code E81?

It depends on the cause. This is often caused by something simple. Try the safe checks below; if the code returns, book a service call before it turns into a no-heat or no-hot-water emergency.

Can I reset Bosch code E81 myself?

You can try one reset (power off for 30 seconds, then on). If Bosch code E81 comes back, the cause is still there and a licensed technician should check it.

Who can fix Bosch code E81 near me?

Aurora Star Tech Inc. repairs Bosch heat pumps in Vaughan, Toronto and across the GTA. Call (647) 657-2977 or book a service call online.

Homeowner help: AC Running But Not Cooling: What to Check · Heat Pump Not Heating or Blowing Cold Air

Source: Bosch IDS Light installation BTC 762003308 D (02.2025), Fault Code Table 23 and 17.12 Error Code Troubleshooting, p.42-59; Bosch IDS Premium Connected installation BTC 762003301 D (02.2025), Fault Code Table 22 and 18.12 Error Code Troubleshooting. Written in our own words as a summary; always check the original manual.

General guidance for qualified technicians. The manufacturer's installation and service manual and local codes always take priority. Aurora Star Tech is not affiliated with, endorsed by or sponsored by any equipment manufacturer; brand and model names are used only to identify equipment and belong to their owners.

Emergency HVAC Service

647-657-2977