Viessmann Error Code FH 0P: AP mode on / no Wi-Fi kit (Mini-Split)
Viessmann error code FH 0P on a mini-split means: AP mode on / no Wi-Fi kit. It is also called Viessmann diagnostic code FH 0P.
Homeowner? What Viessmann code FH 0P means for you
Usually minor Your ductless mini-split is reporting: AP mode on / no Wi-Fi kit. This code is usually informational or minor. The safe checks below often clear it; call us if it keeps showing up.
Safe things you can check yourself
- Check the remote: fresh batteries and the right mode (Cool, Heat or Auto).
- Check the breaker and the outdoor disconnect; both should be ON.
- Open the front cover of the indoor unit and rinse the washable filters if they are dusty; let them dry before putting them back.
- Keep the outdoor unit clear of snow, ice and leaves.
- Try one reset: turn the power off for 30 seconds, then back on. If the code comes back, stop resetting and call a technician.
Call (647) 657-2977Book a service call
Licensed technicians serving Vaughan, Toronto and the GTA.
What does Viessmann error code FH 0P mean?
AP mode is active, or no Wi-Fi kit is installed.
Applies to: DLFSHBH high wall indoor units 09-24K (Midea / Carrier / Viessmann) on DLC multi-zone or single-zone outdoor units
Viessmann models that use code FH 0P
DLFSHBH09XAKDLFSHBH12XAJDLFSHBH12XAKDLFSHBH18XAKDLFSHBH24XAK
Other Viessmann Mini-Split codes
All Viessmann Mini-Split error codes →
Viessmann code FH 0P: homeowner questions
What does Viessmann code FH 0P mean?
AP mode on / no Wi-Fi kit. AP mode is active, or no Wi-Fi kit is installed.
Is it safe to keep using my ductless mini-split with code FH 0P?
Usually yes. Code FH 0P is normally minor, but if it keeps coming back have it checked.
Can I reset Viessmann code FH 0P myself?
You can try one reset (power off for 30 seconds, then on). If Viessmann code FH 0P comes back, the cause is still there and a licensed technician should check it.
Who can fix Viessmann code FH 0P near me?
Aurora Star Tech Inc. repairs Viessmann ductless mini-splits in Vaughan, Toronto and across the GTA. Call (647) 657-2977 or book a service call online.
Homeowner help: AC Running But Not Cooling: What to Check · Heat Pump Not Heating or Blowing Cold Air
Troubleshooting guides
- Indoor unit leaking water All brands · Mini-Split
- Poor capacity / high head All brands · Mini-Split
- Water leaking All brands · Mini-Split
- Discharge the inverter capacitors before service Viessmann · Mini-Split
- Display shows a strange code or does not answer the remote - DLFSHB indoor Viessmann · Mini-Split
- Multi-zone: one room heats, another will not cool - DLC multi-zone Viessmann · Mini-Split
- Read live data with the outdoor check button (SW1) Viessmann · Mini-Split
- Run the automatic wiring / piping correction Viessmann · Mini-Split
Source: Midea DLFSHBH09XAK indoor display table (photo, 2026-10-16); Carrier MS-DLFSHB-01 High Wall Ductless Service Manual (04/2021), Display Function p.12. Written in our own words as a summary; always check the original manual.
General guidance for qualified technicians. The manufacturer's installation and service manual and local codes always take priority. Aurora Star Tech is not affiliated with, endorsed by or sponsored by any equipment manufacturer; brand and model names are used only to identify equipment and belong to their owners.