Daikin Furnace: View and clear the stored faults (L6F / F10)
View and clear the stored faults (L6F / F10) on a Daikin furnace: The stored fault list is labelled L6F in the troubleshooting chart and F10 (last 10 faults) in the menu table; the center switch steps through it and clears it.
Applies to: Daikin DR96TN/DD96TN two-stage furnaces
How to fix view and clear the stored faults (l6f / f10): step by step
- Press the left or right switch until L6F shows
- Press the center switch and read the stored faults
- To erase them, keep the center switch pressed for 5 to 30 seconds; the display blinks three dashes three times, then shows L6F again
If the unit shows an error code, look it up: Daikin Furnace codes
Models
DD96TN0403BNDD96TN0603BNDD96TN0803BNDD96TN1005CNDR96TN0303ANDR96TN0403ANDR96TN0603ANDR96TN0603BNDR96TN0803BNDR96TN0804CNDR96TN1004CNDR96TN1005CNDR96TN1205DN
Source: Daikin DR96TN-DD96TN service RSD6612304 (05-2024), LED Display Menu p.26 and troubleshooting chart p.28. Written in our own words as a summary; always check the original manual.
General guidance for qualified technicians. The manufacturer's installation and service manual and local codes always take priority. Aurora Star Tech is not affiliated with, endorsed by or sponsored by any equipment manufacturer; brand and model names are used only to identify equipment and belong to their owners.