Icon
Reliable Heating and Cooling Solutions – Quality Service, Fair Prices, Guaranteed Satisfaction!

Trane Error Code H5: Hard lock: drive AC input over-current (AC)

Updated · by Aurora Star Tech Inc.

Trane error code H5 on a air conditioner means: Hard lock: drive AC input over-current. It is also called Trane diagnostic code H5.

Critical severityAir ConditionerAlso Heat PumpTrane 5TTR7

Homeowner? What Trane code H5 means for you

Stop and call Your air conditioner is reporting: Hard lock: drive AC input over-current. This code is a safety shutdown. Turn the air conditioner off and call a licensed technician. Do not keep resetting it. If you smell gas, leave the house and call your gas utility or 911 from outside.

Safe things you can check yourself

  • Check the thermostat: right mode (Heat or Cool), set a few degrees past room temperature, and fresh batteries if it uses them.
  • Check both breakers and the outdoor disconnect box beside the outdoor unit; all should be ON.

Call (647) 657-2977Book a service call

Licensed technicians serving Vaughan, Toronto and the GTA.

What does Trane error code H5 mean?

Input over-current reached hard-lock level. Manual lists only the meaning (A1000BA board); steps are general checks drawn from other sections of the guide.

Applies to: Trane 5TTR7 multi-speed AC (5TTR7024A-060A)

Common causes of Trane code H5

  • Supply voltage out of range
  • Voltage drop from loose or undersized wiring
  • Drive fault
Safety: Gas, electrical and refrigerant work must be done by a licensed technician. Turn off power and gas before servicing, never bypass a safety control, and always follow the manufacturer's manual for your exact model.

Trane models that use code H5

5TTR7024A5TTR7036A5TTR7048A5TTR7060A

Other Trane AC codes

CodeMeaning
F7AC input voltage low
F8DC output voltage fault
F9Drive (MOC) internal fault
FAOutdoor ambient sensor fault
FCCoil temperature sensor fault
FdDischarge temperature sensor fault
H6Hard lock: high drive IPM temperature
H7Hard lock: high drive PFC temperature
H8Hard lock: high coil temperature
HCHard lock: compressor over-current
HdHard lock: high discharge temperature
HFHard lock: outdoor fan over-current

All Trane Air Conditioner error codes →

Trane code H5: homeowner questions

What does Trane code H5 mean?

Hard lock: drive AC input over-current. Input over-current reached hard-lock level. Manual lists only the meaning (A1000BA board); steps are general checks drawn from other sections of the guide.

Is it safe to keep using my air conditioner with code H5?

No. Code H5 is a safety shutdown, so keep the air conditioner off until a licensed technician has checked it.

Can I reset Trane code H5 myself?

Do not keep resetting it. Repeated resets can hide a safety problem; a licensed technician needs to find the cause.

Who can fix Trane code H5 near me?

Aurora Star Tech Inc. repairs Trane air conditioners in Vaughan, Toronto and across the GTA. Call (647) 657-2977 or book a service call online.

Homeowner help: AC Running But Not Cooling: What to Check

Troubleshooting guides

Source: Trane ODR-SVN002E-EN (5TTR7/5TWR7 installer's guide) - section Integrated Variable Speed Control Board LED Indicators, Table 18 (A1000BA models). Written in our own words as a summary; always check the original manual.

General guidance for qualified technicians. The manufacturer's installation and service manual and local codes always take priority. Aurora Star Tech is not affiliated with, endorsed by or sponsored by any equipment manufacturer; brand and model names are used only to identify equipment and belong to their owners.

Emergency HVAC Service

647-657-2977