Icon
Reliable Heating and Cooling Solutions – Quality Service, Fair Prices, Guaranteed Satisfaction!

Bosch Error Code DH: DH data history (Tankless)

Updated · by Aurora Star Tech Inc.

Bosch error code DH on a tankless water heater means: DH data history. It is also called Bosch diagnostic code DH.

Low severityTankless Water HeaterBosch Greentherm T9800 SE · Bosch Greentherm T9900 SE

Homeowner? What Bosch code DH means for you

Usually minor Your tankless water heater is reporting: DH data history. This code is usually informational or minor. The safe checks below often clear it; call us if it keeps showing up.

Safe things you can check yourself

  • Check that gas reaches the house: other gas appliances work, or the propane tank is not empty.
  • Make sure the heater is plugged in and its breaker is on. In winter, keep the power on: it protects the unit from freezing.
  • Outside, make sure the intake and exhaust pipes or vent cap are not blocked by snow, ice, leaves or a nest.
  • Check that the hot and cold water valves under the heater are fully open.
  • If you have a remote controller, turn it off and on once. If the code comes back, call a technician.

Call (647) 657-2977Book a service call

Licensed technicians serving Vaughan, Toronto and the GTA.

What does Bosch error code DH mean?

Shows two counters: operation cycles (how many times the burner has started) and operation hours (hours the burner has run).

Applies to: Greentherm T9800 SE 160/199 and T9900 SE 160/199 tankless water heaters

Safety: Gas, electrical and refrigerant work must be done by a licensed technician. Turn off power and gas before servicing, never bypass a safety control, and always follow the manufacturer's manual for your exact model.

Bosch models that use code DH

Greentherm T9800 SE 160Greentherm T9800 SE 199Greentherm T9800 SEC 199Greentherm T9900 i 199Greentherm T9900 SE 160Greentherm T9900 SE 199

Other Bosch Tankless codes

CodeMeaning
C7Fan fault
C8Main water valve fault
C9Barometric pressure sensor damaged
CAWater flow above 9.2 gpm
CEFlue blockage during operation (siphon pressure)
CFFlue blockage during operation (insufficient air)
Display blankDisplay blank - appliance off
E0Control unit internal error
E1Hot water above 194 F (90 C)
E3Flue gas temperature too high, burner cut off
E4Cabinet air too hot, burner cut off
E5Condensing unit flue too hot, burner cut off

All Bosch Tankless Water Heater error codes →

Bosch code DH: homeowner questions

What does Bosch code DH mean?

DH data history. Shows two counters: operation cycles (how many times the burner has started) and operation hours (hours the burner has run).

Is it safe to keep using my tankless water heater with code DH?

Usually yes. Code DH is normally minor, but if it keeps coming back have it checked.

Can I reset Bosch code DH myself?

You can try one reset (power off for 30 seconds, then on). If Bosch code DH comes back, the cause is still there and a licensed technician should check it.

Who can fix Bosch code DH near me?

Aurora Star Tech Inc. repairs Bosch tankless water heaters in Vaughan, Toronto and across the GTA. Call (647) 657-2977 or book a service call online.

Homeowner help: Tankless Water Heater No Hot Water: What to Check

Troubleshooting guides

Source: Bosch Greentherm T9800 SE 160-199 installation 6720816815 (06.2023), 6.5 Information / Adjustments menu pp.47-48; T9900 SE 160-199 installation 6 720 813 635 (2024-06) same section. Written in our own words as a summary; always check the original manual.

General guidance for qualified technicians. The manufacturer's installation and service manual and local codes always take priority. Aurora Star Tech is not affiliated with, endorsed by or sponsored by any equipment manufacturer; brand and model names are used only to identify equipment and belong to their owners.

Emergency HVAC Service

647-657-2977