Button combinations: Gas Fireplace tips

Short, practical technician tips on button combinations for gas fireplace. Check each one against the manual for your exact model before acting.

Learn a handheld remote

Majestic · 300DVBLN/PSC7, 400DVBLN/PSC7, 500DVBLN/PSC7 (Signature Command)

Pair a handheld transmitter with the receiver.

1. Press the RF receiver button on the control board with a paper clip: one beep = on, two = off
2. Hold OFF on the command center while turning the master switch ON
3. Two beeps and the green LED flashes for 10 seconds
4. Press OFF on the handheld in that time; two more beeps confirm

Switch between standing and intermittent pilot

Majestic · 300DVBLN/PSC7, 400DVBLN/PSC7, 500DVBLN/PSC7 (Signature Command)

Signature Command ships as intermittent pilot.

1. Hold the ON button on the command center
2. While holding, switch the master switch ON
3. One beep = standing pilot, two beeps = intermittent pilot
4. Wall switch (if fitted) must be ON

Turn the six-hour auto shutdown on or off

Majestic · 300DVBLN/PSC7, 400DVBLN/PSC7, 500DVBLN/PSC7 (Signature Command)

Control shuts the fireplace off six hours after the last command; on from the factory.

1. With the master switch ON, press the ON and OFF buttons together
2. One beep = enabled, two beeps = disabled